Explainers · Short 09 · Science & systems · 4 November 2026

How an Automatic Gearbox Shifts Itself

An automatic gearbox has no clutch pedal. So how does it shift by itself?

A petrol or diesel engine only works well in a narrow range of speeds, so a car needs different gear ratios as it moves off, cruises, or climbs. In a manual car you change those ratios with a pedal and a lever. A common hydraulic automatic has no clutch pedal, yet it still has to connect and disconnect the engine and pick a ratio.

The engine is linked to the gearbox through a torque converter: two fan-like wheels facing each other in fluid, with a stator between them. The “two fans” picture is a simplification, but it captures the idea. The fluid coupling lets the engine keep turning while the car stands still. Inside the box are planetary, or epicyclic, gearsets: a sun gear in the middle, planet gears around it, and an outer ring, all meshed together at all times.

To change gear, the transmission does not slide cogs in and out. It locks different parts of those gearsets with internal clutches and bands. Pressurised fluid, steered by a valve body, decides which parts are held. The gears stay in mesh. What changes is which element is locked, and therefore which ratio the wheels see.

Products mentioned

Shopping links are not live yet. After an Amazon Associates (Partnernet NL) application in the name of Klik&Shop is approved, any product links will appear in this section, clearly labelled.

This short is about how a typical hydraulic automatic transmission works, not a specific car or part listing.

Sources